Slurry Suction Hose
Slurry suction hose
ZEBUNG Rubber Dredging Hoses are purpose built to the special requirements of our clients. We are in the position to build hose sizes ranging from 100 mm ID to 2200 mm ID. Our designers will select the most appropriate materials from a wide range of products available to us to meet service requirements and the demands requested by our clients i.e. in regard to wear resistance, pressure ratings, tensile strength, bending capabilities and other parameters.
In general the ZEBUNG Rubber Dredging Hoses consist out of an inner lining which can be adjusted to meet the specific requirement of the transported medium. Wear indicator layers can also be implemented in the lining of the hoses which transport abrasive medium.
Armoured discharge hoses are used on dredging line, suitable for transporting sharp, large and heavy stuff such as coral reef, grit and weathered rock. With build-in wear resistance metal, inner layer have good performance of wear and flexing resistance.
Specifications can be designed by customer requirements.
Inner diameters up to 1300mm, various lengths and pressure ranges.
Pipe wall thickness range: from 15mm up to 100mm.
Abrasion-resistant and bending –resistant.
It is convenient to install, flexible to use and safe.
Working angle: 0° to 45 °
working temperature: -20°C to 50 °C
Hose Diameter: 200mm-1100mm
Flange diameter: 340mm-1550mm
Flange thickness: 25mm-65mm
Inner wall thickness: 12mm-45mm(can be customized)
Hole on flange: 8-36
Hole diameter: 22-36mm
We strive to be the best fluid and power convey company in the world.To make our products not only outperform industry standards; but also exceed our customers’ demanding expectations.
|NOTE:ID900mm&1200mm,other parameters are by your requirements|